- Quick, simple connection from any EDS Environmental Sensor, D2 or OW-RTD to any EDS Ethernet/WiFi Bus Master.
- 10’ cable
- Operating Temperature Range -55 to +125°C
- Enables powered operation.
The OW-CBL-1 is designed to make it quick and easy to connect any EDS Environmental Sensor, D2 or OW-RTD to any EDS Ethernet/WiFi Bus Master. The OW-CBL-1 is a 10’ long cable, with a RJ12 connector on one end and tinned bare leads on the other. It enables you to make your connection by simply plugging the RJ12 connector into the supported host adapter and connecting the tinned leads to the supported sensor:
- HA7Net (internal jumper must be configured to supply 5 Volts to pin 6)
- OW-SERVER-ENET-2
- OW-SERVER-WiFi-2G
The OW-CBL-1 is designed to allow powered operation to the following products:
- D2P
- D2PC
- OW-ENV-TH
- OW-ENV-THR
- OW-ENV-THPL
- OW-ENV-THPLR
- OW-ENV-TL
- OW-ENV-TLR
- OW-ENV-TP
- OW-ENV-TPR
Its operation range for the cable is -55C to +125C. The wiring details for the OW-CBL-1 are available below:
RJ12 Plug
- Pin 3 - 1-Wire Data
- Pin 4 - Ground
- Pin 6 - V-Out (+5V dc)
|
Bare Leads Color Coding
- Blue = 1-Wire Data/OW
- White = Ground/GND
- Orange = Power/+5V
|
