 Part # - 4007-38 - Point View Receiver LR, 418 MHz
Features
- High performance 418 MHz receiver
- Compatible with OneSix DDE Server and OPCServer
- Supports PointView PC Software
- Serial connection directly to a PC
- Powered by RS232 port or external source
- ASCII radio packet data output
- Decodes CRC-16 error encoded radio packets
- DB-9 connector for RS232 interface
- Up to 600 ft. range
Description
The Point View LR is a 418 MHz radio receiver designed to receive and decode
packet data from all Point Six Transmitters. The Point View LR decodes the
CRC-16 encoded packets and translates them to ASCII strings that are sent out the
RS232 serial port at 19200 Baud. No hardware handshaking or command protocol
is required; all data packets are decoded and transmitted serially as they are received.
The Point View LR is very low power; most RS232 ports provide enough power to operate
the receiver. External power input is provided for host serial ports that
cannot provide the necessary current. A simple design approach results
in a low cost receiver that provides error checked ASCII data for all Point Sensors.
The Point View LR is supported by the Point Six OneSix™ DDE Server Software Drivers.
This makes connecting Point Six Wireless products to your PC easy.
Connector Pin Out
| SIGNAL 9–Pin |
CONNECTOR |
RS232
DB9 Signal |
DESCRIPTION
FUNCTION |
| NC |
1 |
NC |
No
connection |
| TXD |
2 |
Transmit
Data |
output |
| RXD |
3 |
Receive
Data |
input |
| DTR |
4 |
PWRIN1 |
input
power (optional) |
| RTS |
7 |
PWRIN2 |
input
power (optional) |
| GND |
5 |
Ground |
(reference) |
| NC |
6 |
NC |
No
connection |
| NC |
8 |
NC |
No
connection |
| NC |
9 |
NC |
No
connection |
General Specifications
| PARAMeter |
SYMBOL |
MIN |
TYP |
MAX |
UNITS |
| Supply Voltage |
VCC |
5.0 |
12 |
16 |
Volts |
| Supply Current |
Is |
18 |
20 |
25 |
mA |
| Range (WOW transmitters) |
|
- |
600 |
- |
Ft. |
| Baud Rate |
|
- |
19200 |
- |
Baud |
| 
