 The DS1923 temperature / humidity logger iButton
is a rugged, self-sufficient system that measures temperature and/or humidity and
records the result in a protected memory section. The recording is done at a user-defined
rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant
intervals ranging from 1s to 273hrs can be stored. In addition to this, there are
512 bytes of SRAM for storing application-specific information and 64 bytes for
calibration data. A mission to collect data can be programmed to begin immediately,
or after a user defined delay or after a temperature alarm. Access to the memory
and control functions can be password protected. The DS1923 is configured and communicates
with a host-computing device through the serial 1-Wire protocol, which requires
only a single data lead and a ground return. Every DS1923 is factory-lasered with
a guaranteed unique 64-bit registration number that allows for absolute traceability.
The durable stainless-steel package is highly resistant to environmental hazards
such as dirt, moisture, and shock. Accessories permit the DS1923 to be mounted on
almost any object, including containers, pallets and bags.
Key Features
- Digital Hygrometer Measures Humidity with 8-Bit (0.6%RH) or 12-Bit (0.04%RH)
Resolution
- Operating Range: -20 to +85°C; 0 to 100%RH (see Safe Operating Range)
- Automatically Wakes Up, Measures Temperature and/or Humidity and Stores
Values in 8kB of Datalog Memory in 8- or 16-Bit Format
- Digital Thermometer Measures Temperature with 8-Bit (0.5°C) or 11-Bit (0.0625°C)
Resolution
- Temperature Accuracy Better than ±0.5°C from -10°C to +65°C with Software
Correction
- Built-in Humidity Sensor for Simultaneous Temperature and Humidity Logging
- Capacitive Polymer Humidity-Sensing Element
- Hydrophobic Filter Protects Sensor Against Dust, Dirt, Moisture, and Contaminants
- Sampling Rate from 1s up to 273hrs
- Programmable Recording Start Delay After Elapsed Time or Upon a Temperature
Alarm Trip Point
- Programmable High and Low Trip Points for Temperature and Humidity
Alarms
- Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function
- 512 Bytes of General-Purpose Memory Plus 64 Bytes of Calibration Memory
- Two-Level Password Protection of All Memory and Configuration Registers
- Communicates to Host with a Single Digital Signal at Up to 15.4kbps at Standard
Speed or Up to 125kbps in Overdrive Mode Using 1-Wire Protocol
- Individually Calibrated in a NIST-Traceable Chamber
- Calibration Coefficients for Temperature and Humidity Factory Programmed
into Nonvolatile (NV) Memory
Applications
- Environmental Studies/Monitoring
- Temperature and Humidity Logging in Food Preparation and Processing
- Transportation of Temperature- and Humidity-Sensitive Goods, Industrial
Production
- Warehouse Monitoring
Key Specifications
|
Part Number |
Memory Type |
Memory Size |
Humidity Logger |
Temperature Logger |
Other |
|
DS1923 |
NV RAM |
512 Bytes |
0 to 100%RH |
-20C to +85C |
8192-Byte Temperature Log
Accuracy Correctible to ±0.5°C from -10°C to +65°C
Built-in Capacitive Polymer Humidity-Sensing Element
High/Low Humidity Alarms
High/Low Temperature Alarms
Sampling Rate from 1 second up to 273 hours
Selectable 8-bit (0.5°C) or
|
iButton and 1-Wire are registered trademarks of Dallas Semiconductor Corporation.
Our intention is to never be undersold! If you find this product for
less, please give us the opportunity to match the price!
|
