 The CT1 Counter is designed to count and maintain switch closure
pulses from dry contact devices such as relays and magnetic
reed switches. A 32-bit time stamp is maintained with the last three
transitions to the active (closed) state. The CT1 Counter provides the necessary
switch excitation voltage, so no external power source is required. CAT–5 cable
provides electrical connection to the 1-Wire network. The output is digital, all
data conversions are done internally. Therefore, distance to the sensor is unimportant
for data integrity and it may be placed up to 2000+ feet from the host using CAT-5
twisted pair cable. In addition all I/O and data communications with the sensor
are CRC16 error checked for accuracy. The data is stored in RAM memory as a TMEX
data packed record. The most recent three counts and times are stored, most recent
first, in memory. The user can determine rate, total time and total count at any
time with a single read of the TMEX file format compatible RAM page 2.The CT1
Counter has a built-in multidrop controller (DS2423), which provides two unique
64 bit registration numbers (8-bit family code + 48 bit serial number + 8 bit CRC)
assuring error-free selection and absolute identity; no two parts are alike. Unique
addressing allows I/O function to be identified absolutely, no more dip switch address
confusion. All unique counter identification and calibration data is stored in on-board
ROM memory for easy installation and setup.
The CT1 Counter is compatible with the EDS HA5, HA7, HA8 and the Dallas Semiconductor
DS9097U and Tini 1-Wire interface products. The data is stored as a 28 byte record
packed in TMEX file record format. This record contains the most recent three sets
of 32-bit times and 32-bit counts. The data record is CRC-16 error checked for accuracy.
The CT1 Counter data record contains the three most recent time/count values. This
consists of 3 8-byte fields starting with the most recent time/count value each
in 32-bit format. The data is stored in the RAM memory of a DS2423 in page 2, memory
location 0040 Hex. The record is organized as a TMEX file record with byte count,
data, continuation pointer and CRC-16 for a total of 28 bytes.
Features
- 32-bit counter/32-bit timer.
- Counts and times switch closure inputs.
- TMEX file-record formatted data.
- Unique Network addresses.
- Triple buffered time/count in 32-bit format.
- Self-exciting switch closure input.
- Digital Output Data.
- CRC16 Error Checking.
- Flexible power requirements.
- 1-Wire communication protocol.
- Supported By EDS HA5, HA7 and HA8.
- As many as 200 devices on the net.
- Up to 2000+ Feet from Host on CAT 5 twisted pair cable.
- ESD protection on 1-Wire and count inputs.
- Sealed, stackable ABS enclosure.
Specifications
- Power Input Voltage: 8 - 16 Volts
- Power Supply Current: 5 - 10 MilliAmp
- Switch excitation voltage: 4.8 - 5.5 Volts
- Switch denounce time: 10 MilliSec.
- Operating Temperature Range: -40 - 85 ºC
- Count pulse width: 10 MilliSec.
- Count rate: 0 - 50 Hz.
- Timer Resolution: 5 MilliSec.
- Timer Rollover Period: 284.5 Days
- Read Period: 100 MilliSec.
1-Wire is a registered trademark of Dallas Semiconductor Corporation. TMEX
is a trademark of Dallas Semiconductor Corporation.
|
