 The Z2TEN is a 0-10 Volt analog output generator with a built in
interface for multidrop with other 1-Wire devices in a CAT-5 twisted
pair network of up to 2000 feet and as many as 200 devices. The Z2TEN has a built-in
multidrop controller (DS2406) which provides a unique 64 bit registration number
(8-bit family code + 48 bit serial number + 8 bit CRC) assuring error-free selection
and absolute identity; no two parts are alike. Unique addressing allows I/O function
to be identified absolutely.
The Z2TEN provides a 12-bit resolution 0-10 Volt analog output from digital commands
received on a 1-Wire bus. A 12-bit A-to-D provides feedback directly from the generated
output. This provides a closed loop for ensuring that the desired control output
is being generated.
The Z2TEN is designed to operate in a network of EDS 1-Wire digital and analog
modules. Only two network connections are required: common(“C”) and data signal(“S”).
The Z2TEN requires 12-16V DC power at very low current.
The Z2TEN is enclosed in an ABS enclosure 2” X 2.5” X 1”. All connections are
made with Phoenix screw connectors.
The Z2TEN can be connected in a 1-Wire network for continuous polling (with OneSix).
The Z2TEN requires a 1-Wire host interface or adapter such as the EDS HA3, HA4,
HA5, HA7S, HA3T, HA7T, or Dallas Semiconductor DS9097U, DS9097E.
|
Connector
|
Description
|
| + |
Supply Voltage |
| C |
Power and Signal Ground |
| S |
1-Wire Signal |
| G |
Analog Output Ground |
| A |
Analog Output |
Features
- Single 0-10 Volt Analog output.
- 12-bit Analog feedback from control output.
- 1-Wire communication protocol.
- Unique 64 bit registration number.
- CAT-5 twisted pair up to 2000 Feet, 200 devices.
- Very Low power requirements.
- Built-in multidrop controller, (DS2406).
- All data transfers are CRC16 error checked.
- 12 Volt DC operation.
- 2” X 2.5” X 1” ABS Enclosure.
- Phoenix screw connectors.
- OneSix compatible.
Specifications
- Supply Voltage: 11 - 16 Volts
- Supply Current: 4 - 6 mA
- 1-Wire Load: 3 - 7 MicroAmp
- Analog Output Voltage: 0 - 9.99 Volts
- Analog Output Impedance: 2K Ohm
- Analog-Feedback Resolution: 12 Bits
- Operating Ambient Temperature Range: -20 - 70 Deg. C
1-Wire is a registered trademark of Dallas Semiconductor Corporation. Phoenix
is a trademark of Phoenix Contact.
| 
