-
Previously part # T2001S-R.
-
Ambient temperature range wall mount.
-
High impact ABS plastic enclosure.
-
Surface or wall mountable.
-
Stranded cable, 12 foot in length.
-
Terminated with RJ12 plug.
-
Embedded Maxim DS18S20 sensor.
-
No external power required, or can be optionally powered for faster operation.
-
Uses 1-Wire communication protocol.
-
Compatible with all EDS 1-Wire bus masters.
-
Chemical resistant cable.
-
Automatic unique device addressing.
The OW-TEMP-SW-12R temperature sensor is designed for general-purpose ambient temperature measurement applications. It is constructed of high impact ABS plastic, ivory in color, and suited for wall or surface mounting. The OW-TEMP-SW-12R is vented for good thermal contact with the ambient air. The back half of the ABS enclosure can be removed for a low profile wall mounting with a single screw through the center of the enclosure.
The OW-TEMP-SW-12R is directly compatible with all Embedded Data Systems 1-Wire bus masters, included the HA7Net. For complete documentation on the embedded DS18S20 sensor, please refer to the manufacturers spec sheet available at http://maxim-ic.com.
The RJ12 pin outs are as follows:
-
Pin 3: 1-Wire Signal, Blue
-
Pin 4: Common (GND), White & Ext. Power (VDD), Orange (parasitic mode)
Our standard OW-TEMP-SW-12R sensor has a 12 foot long cable; however, with minimum orders we can manufacture the temperature sensor to custom lengths. Please contact us for a custom quote.
