Have a Question? 502-859-5490
MeshNet Starter Kit
MeshNet Controller

MeshNet Starter Kit

Part Number:MN-KIT

Availability:

 Not for Sale
; 0

Choose Options

Include US/Canada Power Supply
Price:$255.95

Overview

  • Complete MeshNet Wireless Start Kit 
  • Supports HTTP, HTTP Post, SNMP & SNMP Trap protocols
  • Globally unique 64-Bit serial number. 
  • Plug-N-Play installation. 
  • User configurable parameters. 
  • Proxy server support 
  • Real Time Graphing & Logging through web interface
  • Robust Communication protocol. 
  • Universally accepted 2.4Ghz radio frequency.
  • Frequency Hopping
  • Support up to 35 nodes (Sensors/Repeaters)
  • Complies with FCC, Industry Canada and CE Marking requirements 
  • Diagnositc Trasmission Data

The MeshNet Wireless Starter Kit includes all the necessary hardware to begin using EDS'  proprietary MeshNet Wireless Sensor network. The starter kit begins with MeshNet Controller which provides the means to viewing data in real time, configuring Wireless sensors, and a variety of administrative functions. The starter kit also includes the MeshNet Temperature/Humidity/Pressure/Light sensor, MN-ENV-THPL, The wireless system can be further grown up 35 total wireless devices per Controller.  The MeshNet Wireless Controllers are designed to coexist enabling much larger sensor deployments.  The MeshNet Controller also provides simple structures for integrating the MeshNet Wireless System into 3rd party monitoring and control applications using SNMP, SNMP Traps, HTTP or HTTP Post. More details software developers are available in the User Manual.

Web Interface


The web interface also provides a straightforward method for configuring MeshNet hardware and a graphing interface which allows for the easy monitoring of sensor data in real-time. Individual sensor pages allow for up to 3 parameters to be displayed for any one sensor. The overview pages allow all sensors reporting a selected parameter to be graphed together. Graphing data can then be easily exported for more in depth analysis with the click of the "Download" button.Real-Time Sensor Graphing

Linking Sensors and Repeaters


Each MeshNet repeater and sensor (nodes) requires a physical connection to the Controller in the initial setup (linking). The linking process allows the node and controller to exchange necessary information for joining the unique Wireless network which also enables multiple MeshNet wireless networks to coexist. Nodes can switch MeshNet wireless networks through repeating the linking process with the new wireless network’s controller. The Plug-n-Play linking process is completed by following the simple steps below:

  1. Take the supplied 3.5mm linking cable (see right) and attach it to the MeshNet Controller.
  2. Attach the remaining 3.5mm plug and attach it to the MeshNet Repeater/Sensor.
  3. Apply Power to the Controller followed by the Repeater/Sensor.
  4. Wait for the LED to quit blinking. (It will take approximately 5 seconds.)
  5. Disconnect the linking cable from the Repeater/Sensor and Controller
Browse By Category